This product has particular rust prevention and anticorrosion functions. It can fast and effectively form a special protection film to absolutely protect rubber and metal at the bottom of vehicles from corruption of steam and attack of stones and greatly reduce noise. It is especially suitable for the bottom of vehicles, luggage boots, sand boards and the pot hole of wheel, etc. the product quality can meet the professional requirements of all vehicle-making factories.

USAGE DIRECTION:

1. Clean and dry the surface to be sprayed. Ensure that the surface to be sprayed is clean and dry and of no dust, oil and oil film. The part not to be sprayed must be enveloped.

2. The product should be shaken evenly before and during use.

3. This product must be sprayed on an unexposed part or a waste article for a test.

4. This product should be sprayed evenly up and down 20-40cm from the surface. The part sprayed incorrectly can be cleaned immediately with cloth impregnated with kerosene or volatile liquid.

5. When most of this product is used up and the rest can’t be sprayed, try to press the jet nozzle and rotate the can until the material in it can be sprayed.

6. After used, clean the jet nozzle. Reduce the can until clean gas can be sprayed.

7. This product can absolutely be dried 4-6 hours after sprayed depending on operation temperature.