FEATURES:

This product is refined raw materials has the advantages of easy operation lights transparency and high weather ability. There is significant effect for renovating the light yellowing, oxidation and scratches. Suitable for the renovation of all car old lights and the protection of new or lights, extend the service life of the lamp.

APPLICATION:

●Polishing: In accordance with the aging condition, choose appropriate waterproof abrasive paper (1000# or 1500#) for wet grinding, finally use 2000# waterproof abrasive paper for we grinding to smooth the lampshade Covering: Wash and clear all dirt on lampshade (If the lampshade is dirty,please clean, dry the water stains and cover the cover around the lampshade to avoid spraying onto the car coating. Spraying: Shake(30-60 seconds) well before use,spray evenly to the lampshade with distance around 10-15cm abut two or three times (No spraying in the open). 1st and 2nd spray interval should be 5-8 minutes (According to the local weather). If the lampshade is shining, the work is done. If no, please spray 1 more time. Drying: Natural drying need 10-15 minutes and expose to the sunshine for 20-30 minutes (The time is depends on the local weather). Or use ultraviolet radiation for 5 minutes Remove the cover when finish the work.

CAUTION:

Spray upright at an angle of no less than 45degree between can body and horizon.Prolonged exposure to sunlight or heat may cause bursting. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above120°F. Do not place inside cars. Keep away sources of ignition. Avoid contact with eyes. FIRST AlD: For eye contact,flush thoroughly with water for 15minutes.KEEP AWAY FROM CHILDREN ANDANIMALS.