Characteristics: The product can quickly get dry and form a metal mirror with extreme strong decoration effect. Additionally, it can effectively resist UV radiation, increase the anti-aging performance, and prevent the metal surface from rusting. Since it easily gets damaged in its appearance, it is not suitable to be used in parts where frequent friction and collision occur. With fine covering power, the product needs no matching primer.

Availability: It is applicable for the base material of metal, glass, plastics, glabrous wood and ceramic and etc.

Usage: Clean the surface of the sprayed article to prevent dust, dirt, grease and etc. Shake the pot hard for 30 seconds until the lacquer is mixed well, and spray the article evenly from 15-20cm away. The optimal effect can be achieved when the product does not flow down. It is suggested not to use the lacquer as covering coating. Otherwise, the mirror effect will be destroyed. Do not use the lacquer under the environment where much adhesion is needed. Spray it in rainy days or under severe environment as seldom as possible. Since it easily gets damaged in its appearance. It is not suitable to be used in parts where frequent friction and collision occur.

CAUTION:

Spray upright at an angle of no less than 45 degree between can body and horizon. Prolonged exposure to sunlight or heat may cause bursting. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120℉. Keep away sources of ignition. Avoid contact with eyes. FIRST AID: For eye contact, flush thoroughly with water for 15 minutes.

KEEP AWAY FROM CHILDREN AND ANIMALS.